drilling rig
Minimum Order: 0
Quality/Safety Certification: 0.00
Made by ourselves.It is a powerful, high-speed cutting drill with quickly movement and rotating speed.
QN150-1, is made by ourselves.It’s a powerful, high-speed cutting drill with quickly movement and rotating speed,which can replace the work of about 100 peoples. Not only saves time but also to control costs. QN150’s largest air drill cutting diameter up to 80mm, maximum depth is 3.5m. The cutting rig with fuel, high efficiency multiple functions. At the construction site of a deep hole 3.5m in the shale operation could be completed within 30 seconds, in the sand on the job can be completed within 2 minutes.
Technical Data | ||
Operating Weight | 13600kg | |
Bucket capacity(SAE) | 0.55m3(SAE) | |
Engine | Model | CUMMINS 4BTAA3.9 |
Type | 4-cylinder in-line, turbocharged, water-cooled | |
Rated power | 85.4kw/2200rpm | |
Max. torque | 477N.m/1500rPM | |
Displacement | 3.9L | |
Travel and Swing System | Max. travel speed | 30km/h |
Gradeablity | >35° | |
Swing speed | 13r/min | |
Hydraulic System | Main Pump | 2 variable displacement axial piston pumps |
Rated oil flow of main pump | 2x132L/min | |
Rated oil speed of main pump | 2200rpm | |
Travel motor | Variable displacement axial piston motor | |
Swing motor | Axial piston motor | |
Work pressure of attachment and travel circuit | 330bar | |
Work pressure of swing circuit | 270bar | |
Work pressure ofpilot circuit | 40bar | |
Tank Capacity | Fuel tank | 270L |
Hydraulic oil tank | 125L |
Activation parameter | |
Borehole depth | 3700mm |
Hole diameter | 81mm |
Boring rod specs | T51 |
Max. output speed of rotation | 460r/min |
Max.feeding force | 30kN |
Normal feed velocity | 0-5m/min |
Feed travel | 3750mm |
Track width | 500mm |