1.Advanced technology with good price
2.Reliable and stable maintenance
3.Well after-sales service
4. reply within 12 hours
Aerated concrete production line automatic production equipment:
First, the raw material pre-treatment equipment
1, the crusher: fly ash aerated concrete block materials, such as lime, gypsum, etc., must be broken in order to proceed to the next procedure.
2, Ball: fly ash aerated concrete used in the lime, gypsum grinding must be carried out only after a better response.
Second, measuring equipment, raw materials commonly used computercontrolled automatic measurement measurement system.
Third, casting equipment, materials, mixing materials, mixing equipment, mainly pouring mixer, mixing equipment It is also the slurry casting equipment.
Fourth, automatic flip fly ash aerated concrete cutting hair in the air after casting to form a green body.As the large volume of green body, to achieve the required product size, it is necessary for cutting.In the production process, turning the green body together with a spreader to mold the air turn 90 degrees to set cutting small car, stripping the green body together with the side to stay in a small cutting board, cut the motor car powered by a walk through the slitdevice to complete the vertical cutting, slotting, cutting level; cutting cross-section of the car to walk to the central location device after the cessation of cross-device startup, has cut a vertical cross-section of frame from top to bottom to complete horizontal cut; cutting car and then walk to the grouping spreaderspreader at the green body by the grouping (even side) to lift a small car, steam curing, cutting the car returns to its original location to the next cutting cycle.I flip produced automatic cutting machine, is the introduction of advanced management techniques, based on the digestion re-innovation.Device structure is simple, advanced technology, real-time monitoring of the entire cutting process, to ensure that the error of 1mm or less finished.
Fifth, autoclave autoclave is silicate hydration products to get physical and mechanical properties of the device.The operation used in the production of fly ash aerated concrete, is the relationship between production and energy security an important part.
Sixth, the main boiler boiler support for the autoclave and pre-heat furnace and other facilities to provide heat.
Seven auxiliary equipment
1, the mold frame, floor, composed of these devices with mold car mold casting, fly ash aerated concrete is the main molding equipment.
2, steam curing car, car ferry, spreader