Wall Panel machine,insulated panel machine
1.shaping cycle: 2 hours
2.Reduce transport costs
3 Better working environment
Light Insulated Wall Panel Making Machine
Light composite thermal insulation wall panel is a kind of nonload bearing lightweight composite sheet. Using
fiber cement or calcium silicate board as a panel in the middle filled with lightweight composite core concretes.
The production has advantages of solid, lightweight, thin, better strength, impact resistance, hanging strength ,
heat insulation, sound insulation, fireproofing, waterproofing, easy cutting environmental protection. It can be an
arbitrary slot, without batch file, dry operation. Other wall materials can not reach our comprehensive advantages.
The wall panel can be widely used as un-load-bearing wall body in various of high and multi
storeys building, and also can be used for sound acoustic, fire wall safety and practical uses. Once this product is
promoted in the market, they are immediately popular and welcomed in many builders and real estate agency.
Because this wall panel not only owns satisfactory highquality performance, but also reduce wall occupied area,
improve residential occupied area (every 100 square residential area increased 4 square of actual living space),
reduce the structural load, improve the seismic safety of the building performance and reduce total cost and create
most favorable value for you. It is a new breakthrough in wall material reformation in China.
Light Insulated Wall Panel Making Machine Production Flow Chart
1.pre-expander
2.Vulcanized drying bed
3.Ripening bin
4.Screw conveyor
5.Mixing System
6.Cement Silo
7.Control Room
8.Grouting container
9.Mold
10.Mobile auto-stacker
11.Forklift
12.Finished Product
Insulated Wall panel making machine technical parameters;
Function | Feeding Capcity | Wall panel size | Productivity Of different thivkness | Hydraulic unit | Moulding cycle | Machine weight | Composition | ||
Moulding device | 1.7 cu m | 2440*600*75/90/100/150/200 mm | 75 mm | 12 pcs | Motor power | 2.2 kw | 2 hours( Alumina cement) | 5 T | Host machine
Hydraulic unit
moulds |
90 mm | 10pcs | Piston diameter | Φ 80 mm | ||||||
100 mm | 9pcs | Working route | 400 mm | ||||||
150 mm | 7pcs | Working press | 3~4 Mpa | ||||||
200 mm | 5pcs | ||||||||
Insulated Wall panel grouting container technical parameters:
Function | Grouting capacity | Working press | Motor power | Size | Composition | |
Transfer and press the material in the mixer inject into the moulding machine | 1 cu m | 0.4 Mpa | Running Motor: 1.1 kw | Air compressor motor: 3kw | 2755*1200*1665 mm | Grouting machine Running gear air compressor pipeline |
