1.Good lubricating properties
2.Little power loss
3.Work longer
4.Base of small construction machinery
Steel Bar Cutting Machine(GQ50-J) is a kind of highly effective equipment,newly designed and produced by our company according to market requirements. The machine is produced according to the standard <JG/T5085--1996>.It mainly makes up of walk wheel part,transmission part,machine body,clutching mechanism,tool bit,tool apron and so on.
It has the following features:
1) Good lubricating properties.It adopts full close structure and lubricates by using gears splash.It can operate more than three months continually if it is added oil(8-10kg) at a time.
2) Little power loss.For lubrication conditions improving,gear-side uses rolling bearing,the resistance is small,compared with the similar cutting machine with load power can reduce by one third.
3) Work longer.It adopts the high steel knife block,connecting rod,high-speed international standard motor,its quality is more stable and it will last longer.
Cutting Diamension(plain carbon steel) | ≤Φ50mm |
Cutting Diamension (2-grade deformed steel bar) | ≤Φ40mm |
| Cutting Specification Flat Steel | 80×18mm |
| Cutting Specification Angle Steel | 63×63mm |
| Cutting Specification Square Steel | 40×40mm |
| Cutting Frequency | 28times/min |
| Power of Motor | 4KW-2p |
| Motor Speed | 2890r/min |
| Rated Voltage | 380V |
| Whole Weight | 500kg |
| Overall Dimension | 1420×530×850mm |
reference form of cutting steel bar meanwhile:
| steel bar dia(mm) | 6~8 | 9~13 | 14~18 | 19~20 | ≥20 |
| root number each time | 6 | 5 | 3 | 2 | 1 |
