1. DIN rail mounting electric isolators/isolation
2. 4-wire
3. width: 12mm
4. input/output signal range: 4~20mA 0~20mA 1~5V
R5C series intelligent digital analogue isolators, which are used for industrial automation system, transform analog signal outputted from four-wire system instrument in industrial field into DCS/PLC by isolation. It realized the matching of signal types, signal amplification, isolation and antiinterference, etc. between industrial on-site instruments and DCS/PLC. The input and output signals of products in this series can change ranges through software,adjust through digitization, automatically
dynamic calibration offset, automatically cover temperature drift and other functions. This product contains one in-one out, one-in two-out, two in-two out a variety of combination forms. Width of the shell is only 12mm, which satisfies the high-density requirements of on-site installation.
General specifications | |
Construction | Ultra-thin terminal connection |
Connect | Phoenix terminals with M3 screw |
Wire diameter | 0.2-2.5mm2 |
Tightening | 0.5-0.6Nm |
Housing material | Fire resin |
Protection grade | IP20 |
Mounting | EN60715 standard symmetrical 35mm DIN rail |
Dimensions | W12 x H95 x D110 mm |
Weight | About 100g |
Input signal specifications | |
Input signal range | 4~20mA,0~20mA,1~5V,0~5V,0~10V etc. Input signal types |
Input resistance | Current signal input: ≤60W |
| Current signal input: ≥500KW |
Absolute maximum input | Electric current signal: ≤200mA (with over-current protection) |
| Current signal: ≤30V (with over-voltage protection) |
Output signal specifications | |
Output signal range | 4~20mA,0~20mA,1~5V,0~5V,0~10VThe output signal types |
Output signal resistance
| 0/4~20mA output: 0~550W (with short circuit protection) |
| 0~10mA output: 0~1100W (with short circuit protection) |
| 0/1~5V output: ≥500KW (with short circuit protection) |
| 0~10V output: ≥1MW (with short circuit protection) |
Typical application:
Ø Field existing grounding potential difference.
Ø Field existing heavy electromagnetic interference.
Ø Protecting DCS or PLC system.
Ø Signal need to be distributed in two roads.
If you have any further queries, please feel free to contact with us.