Electornic coin acceptor
1. voltage: DC+12V
2. coin diameter:18mm-31mm
3.coin thickness:1.2mm-2.4mm

Electronic coin acceptor

1), remove the factory installedplastic token from the coin sampling clamp.

2),slide the coin clamp backward &insert a right coin into the clampslot then pinch the coin.

3),adjust the insert slot openning size by lossening the screw in the back side of front panel to fit your coin's diameter if necessary that can prevent the bigger invalid coins from inserting.

4),select the right mode between normal.open and normal close.choode the right speed of coin acceptance among 100ms(slow speed /long pulse) and 50ms(medium speed /medium pulse) and 30ms(fast speed/short pulse) by TIMER SWITCH for synchronizing with your softwares.

5),VR tunning for sensivity of coin acceptance turn clockwise(+) for slack coin selection and anti-clockwise(-) for strick coin selection against slugs.

and the specifications of availavel coins:

voltage: DC+12V,coin diameter:18mm-31mm,coin thickness:1.2mm-2.4mm