Welcome to B2BAGE
Pressure Compensation Device DA 084
Pressure Compensation Device DA 084

Minimum Order: 0
Quality/Safety Certification: 0.00


1.Pressure Compensation Device DA 084
2,Stego pressure measuring devices
3,High degree of protection
4,Easy to install

Pressure Compensation Device DA 084

High degree of protection Easy to install

It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically. The specially designed pressure compensation plug DA 084 permits a controlled change in pressure. It can be installed easily in any enclosure. Because of the pressure compensation plug's high degree of protection (IP45), the protection type of the enclosure will not be affected.

 

>>

MountingPG 29 thread with union nut
Materialplastic according to UL94 V-0
Air interfaceapprox. 7cm²
DimensionsØ 65.5mm x 30.5mm
Fitting positionvariable
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
InstallationMake cut-out Ø 37+1mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.

 

Art. No.ModelProtection type1 packing unitWeight (approx.)
08400.0-00without gasketIP452 pieces62g (31g/pc.)
08400.0-04with gasketIP552 pieces62g (31g/pc.)

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.