Digital Insulation Tester YH5110
1)Storage Temperature:-40 to 60 degrees
2)1000V DC Voltage,750V AC VOL
3)Prompt delivery
OE

Digital Insulation Tester YH5110
Specifications
General Specifications
Complies with IEC/EN 61010-1 1000V CAT∏ ,600 V CAT IV.
1.Voltage:1000V DC Voltage,750V AC Voltage(TRMS).
2. 6600 Count(except for capacitance,temperature,insulation).
3. When the input terminals is V and COM,The overload protective voltage is up to AC 250 V (TRMS) ;When the input terminals is mA and COM, protective Current is 0.4A; when the input terminals is Hi and Lo , The
overload protective voltage is 600V.
4.Batteries:Four AA batteries (NEDA 15A or IEC LR6) Meter use 1000 hours; Insulation test use: Meter can
perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard
tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Insulation Measurement Range:0.01 MΩ to 2 GΩ.
6 Insulation Test Voltages:50, 100, 250, 500, 1000 V .
7.Insulation Source Voltage:+ 20 %, - 0 %.
8. Insulation Short-Circuit Test Current : 1 .5mA nominal.
9. Insulation Auto Discharge: Discharge time <1 second for C = 1 μF or less.
10. Insulation Live Circuit Detection:Inhibit test if terminal voltage > 20 V prior to initialization of
test.
11. Insulation Maximum Capacitive Load:Operable with up to 1 μF load.
12. Storage Temperature:-40 °C to 60 °C.
13.Operating Temperature:0°C to 40 °C .
14. Storage Altitude:12000m
15.Operating Altitude:2000m 1000V CAT III,3000m 1000V
16. Temperature Coefficient:0.05 × (specified accuracy) per ° C for
temperatures < 18 °C or > 28 °C.
17.Relative Humidity:40%~75%.
18.Size:205(L)×102(W)× 58(H)mm.
19. Weight::approx 390g.