fixed code/learning code receiver module
1. 22x18mm only
2. Decode:2272/2240/1527/2240
3. 4 routes output
4. T4/M4/L4
Model No.: DL-R99AM
Description: tiny fixed code/learning code receiver module
Product Detail:
DL-R99AM is a multi-function super heterodyne receiver module with MCU decode IC, It can decode fixed code 2262, 2264, learning code 1527, 2240 and most of the fixed code and learning code IC in the market. There are 3 different control modes of toggle(PT2272-L4), momentary(PT2272-M4), interlock(PT2272-T4) through different position of the jumper. It is a very tiny size receiver module with the feature of stable performance, wide applications.
Application:
a. Anti-theft alarm system of car, motorcycle, and electrombile;
b. All kinds of intelligent toys, industrial remote control system;
c. Various remote controls for home-appliances, alarm system and lightings;
d. Various remote system of garage door, automatic door and barrier etc.
Technical Specifications:
Operating voltage: | 300MHZ~370MHZ 3~5.5VDC,370MHZ~440MHZ 3.3~5.5VDC |
Operating current: | ≤6.8mA (5.0VDC) |
Operating principle: | super heterodyne |
Modulate mode: | OOK/ASK |
Frequency range: | 315/433.92MHz/customized |
Bandwidth: | 1MHz (315MHz, test when the sensitivity decline to 3dBm) |
Sensitivity: | better than -110dBm (50Ω) |
Rate: | <10Kbps (at 315MHz at -95dBm) |
Decoding format: | MCU(decode fixed code and learning code) |
Output signal: | TTL electric level, 4 route control output; |
Control mode | Toggle(connect L4 & T4) Momentary(connect M4 & L4) Interlock(no any connection) |
Antenna length: | 24cm (315MHz), 18cm (433.92MHz) |
Size and Pin definition
Learning code Instruction
a. Learn the code: press the learning button on the receiver, release when there is a flash on LED, now the receiver module has entered the learning mode, press any button of the remote, LED on the receiver module will flash 2 times, means the code has been learnt successfully. It will exit the learning mode automatically if there is no any demand for 5 seconds.
b. Remove the code: keep pressing the learn button for about 4 seconds, LED will flash 3 times, means all the code in the receive module has been removed successfully
