FriendlyARM Mini 6410 SBC (Single-Board Computer) with 533 MHz Samsung S3C6410 ARM11 processor.
Mini6410 S3C6410 ARM11 Board+4.3" TFT LCD, 256M RAM,1GB NF
sku:OT132
Specification
Dimension: 110 x 110 mm CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S (max freq. 667 MHz) RAM: 256 MB DDR RAM, 32 bit Bus Flash: 128 MB / 256 MB / 1GB NAND Flash. EEPROM: 1024 Byte (I2C) Ext. Memory: SD-Card socket Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors IR: Infrared Receiver USB: 1x USB-A Host, 1x miniUSB Slave-OTG 2.0 Audio Output: 3.5 mm stereo jack Audio Input: Condenser microphone Ethernet: RJ-45 10/100M (DM9000) RTC: Real Time Clock with battery Beeper: PWM buzzer Camera: 20 pin Camera interface (2.0 mm) TV Output: CVBS LCD Interface Touch Panel: 4 wire resistiveUser Inputs: 8x push buttons and 1x A/D pot User Outputs: 4x LEDs Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm) Debug: 10 pin JTAG (2.0 mm) Power: 5V connector, power switch and LED Power Supply: regulated 5V (Mini6410: 0.25 A, Mini6410 + 4.3" LCD: 0.5 A) OS Support STN Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 4096 colors Max: 1024x768 TFT Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 64k colors, true color Max: 1024x768 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays (4.3" and 7") Windows CE 6 Linux 2.6 Android Ubuntu
About Superboot(bios):
Superboot need to be writen to SD card to use.
Superboot support install and run the OS directly,don't need USB line, and it's very fast for installing. Average 1.8M/s
Linux: 125M,writen only need70 sec WindowsCE6: 45M,writen only need 25 sec Android: 80M, writen only need 45 sec Ubuntu: 800M,copy to SD directly UserBin: Bare metal process, or simple single file system image, such as uCos, RT-Thread, etc.; can be programmed to Nand,About SD card writing software:
An empty SD card can't start the board .You need to use a software to write the BIOS into SD card first.And this writen BIOS can't be seen in computer directly.
We provide the software SD-Flasher.exe to make the writing.This software is more powerful than IROM_SD_Fusing_tool.exe
Install WindowsCE system:
In fact , This board come with WindowsCE system.But you can install again:
Step1: copy "images"folder to SD card ; Double clip "images\FriendlyARM.ini" file; Find "OS=Linux", change it to "OS=CE6”, save the change and take out the SD card and put it to the board.
Step2: Set the S2 switch to "SDBOOT" and insert the SD card
Step3: Turn on the board
Step4: wait until the system is successfully writen, About 20 sec.
Step5: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK.
Install Android system:
Step1: insert SD card to computer. ; Double clip "images\FriendlyARM.ini" file
Step2: Find ""OS=CE6” change to OS=Android, save the change and take out the SD card to the board
Step3: Turn on the board ,wait until the system is successfully writen, About 50 sec.
Step4: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK
Install Linux system:
Step1: insert SD card to computer.; Double clip "images\FriendlyARM.ini" file;
Step2: Find ""OS=Android” change to OS=Linux, save the change and take out the SD card to the board
Step3: Turn on the board ,wait until the system is successfully writen, About 50 sec.
Step4: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK
Install Ubuntu system:
Ubuntu is too large(500MB).So no need to write it to SD card. We can run it directly.
Step1: insert SD card to computer. Double clip "images\FriendlyARM.ini" file.
Step2: Find”OS=Linux”,change it to”OS=Ubuntu”,;find”Action=Install”,change it to”Action=Run”;save change take the SD card to the board.
Step3: turn on and run Ubuntu
Items you will receive:
mini6410 developement board 1 pcs(1 GB NandFlash) Power adjuster (+5 v) 1 pcs DB9 serial null modem cable 1 pcs crossover network cable 1 pcs 4.3" TFT touch screen LCD(with touch pen) 1 pcs