Toroidal iron core:
1. Close flux path
2. Low magnetic leakage and low noise
3. High efficiency
4. Light weight
Toroidal iron core: (A series)
A round core wound by automatic machines with one continuous tape of CRGO silicon steel and annealed in a tunnel furnace under the protection of inert gases.
Material thickness: 0.30mm, 0.27mm, 0.23mm, 0.10mm, 0.08mm and 0.05mm
Toroidal iron core: (B series)
B round core wound by short silicon steel strips in 1 to 3 meters long, wounded with joints. They were annealed in vacuum furnace or tunnel furnace under protection of inert gases. The core posses the same advantages of A series, but the price was around 50-70% less than A series.
B series core commonly used as a replacement of EI and other toroidal transformers with lower magnetic loss requirement.
Material thickness: 0.30mm, 0.27mm, 0.23mm
Material Grade | Equivalent Grade | Bm (Gauss) |
BI | M3-0.23mm | 16500/17000 |
BII | M4-0.27mm/0.30mm | 16000 |
BIII | M5-0.30mm | 15500 |
Can produce according to customers’ specification.
Toroidal core application:
Power transformer
Inductor
Instrument transformer
Audio transformer
Voltage regulators
Ballast
The advantage of toroidal core (Compare with EI core)
Smaller sizeLighter weightLess magnetic leakageBetter over-load capacityLow temperature riseEasier design and mountMore informations,pls.connect our other products.