high-frequency transfer smaller volume
Input & output fully isolation
High Compact and light weight
Low power consumption
We design and develop these series by ourselves. The character is high frequency,small scale and off-gird. Approved the patent.
Features
1.high-frequency transfer, smaller volume
2.high-performance MCU manage
3.high-performance MOSFET quick driver. more efficient output
4.high-performance SPWN manage
5.single channel and high-frequency combining(38KHz)
6.single channel and half-wave zero level change combining(50/60Hz)
7.under-voltage alarm function
8. under-protection
9.over-load protection
9.short-circuit protection
10.over-voltage protection
11. pure sine wave output, adapt any laden
12.soft boot output
13.over-temprature protection
User Guide
Installation and connection
Red terminal: Connect DC positive, black terminal: Connect DC negative
AC socket: Connection to the laden
Switch: power properly connected, turn on the switch, the inverter to work
DC input:
Input voltage range: 9.8V to 15.5V / Maximum input voltage: 16.5V
AC output:
Power grid connect
220V AC versions: 190V-250V 50Hz / 110V AC versions: 90V-140V 60Hz
LED indicator:
Red LED: into protection
Red LED: temperature above 70°C, restart automatically after cooling
Green LED: inverter in working order
Notes:
---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC
---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump.
