1. conductivity range: 0.015~2w/m.k
2. digital temp test, accurate to 0.2
3. hot plate <300 cetiment cold plane <room temp.

                                                      DRX-I-PC Thermal conductivity tester

It mainly tests the thermal conductivity of plastic, glass, fiber, foam and other materials and is applied in material properties detection organization, scientific research institution, quality detection department of factory, Institutions of higher education teaching and research.

    Reference standards: GB/T3392-82 Test Method for Plastic Thermal Conductivity, Guarded Hot Plate Apparatus;  

          GB/T3139-2005 Fiber-Reinforced Plastics Composites-Determination of Thermal Conductivity;

         GB/T10801.1 Test Method for Thermal Conductivity of Glass Fiber Reinforced Plastics;

         GB/T10295-1988 Thermal Insulation-Determination of Steady-State Thermal Resistance and Related Properties-Heat Flow Meter Apparatus;

         ISO/DIS 8301 Thermal Insulation-Determination of Steady-State Thermal Resistance and Related Properties-Heat Flow Meter Apparatus;

         ASTM C518-2004 and EN12667

Main technical parameters:

      1. thermal conductivity range 0.015~2w/m.k;

      2. maximum temperature: hot plate <300°C with the heater control, cold plate with refrigerating thermostatic water bath make it below room temperature, its minimum temperature can be -20°C;

     3. digital temperature measuring, accuracy is better than 0.2 level;

     4. sample size requirement: 200×200×(5-20)mm or 300×300×(5-20)mm;

     5. it can be configured thermal resistance or heat flow meter device according to your requirements.