1.No electricity,no noise,no dust
2.High quality, novel design, and environment-friendly....
Product Name:Hand tile cutter

Feature:

1. Do not need water or electricity, no powder created or noise pollution, safe and healthy and environmental protection.

2. Cutting speed is 10 times higher than electrical cutter, but cutting cost is 1/10 less than the electrical cutter.

3. High cutting precision, no waste, lower cost, helpful for joint.

4. Since high quality polishing tiles are rigid, the common electrical cutters always break down the edge during cutting. But our Tile Cutter can cut tiles with smooth cutting edge because it lines and gashes the ceramic glaze firstly then split it deftly.

Working Principle:

The High Efficiency Environmental Portection Heavy Duty Ceramic Tile and Glass Cutter, according to the physical characteristic of fired ceramic crystal rank, line and gash smoothly on the surface of ceramic tile by the super-rigid alloy cutter wheel. Then split the tile according to mechanics lever principle, same as cutting glass, the cutting efficiency is quite high.

Applicable Material:

It is used to cut various tile with ceramic glaze, glass tile, rigid polishing tile, glass etc line-cutting or angle-cutting.

Use Methods:

Step 1, lay the tile flatly on the worktable of the Tile Cutter (Please extend the racks if it is necessary. ) Put down the handle A and make the cutter wheel touch the tile, push the handle lightly and make the cutter wheel gash a clear and continuous line on the surface of the tile.

Step 2, pull back the handle B quickly, the tile will be split along the gash line.

Tips: 

1. The key of cutting the tile well, is that the gash line must be smooth from A to Z, continuous and clear. The cutter wheel is made of tungsten carbide alloy, whose ridid is much higher than the rigid of tile surface, therefore, we just need to press the handle B lightly and push it smoothly, it can gash a line on the surface of the tile. Contrarily, if we press it heavily, the cutting line will be jagged and the cutting edge will be rough, furthermore it will shorten the durability of the cutter wheel.

2. When we cut large size tile, it's better to operate by 2 persons as below image so to avoid rough cutting edge created