alkali-resistant mesh
Weight: 160g; 130g; 300g,etc.
Width:1000mm 30 m or 50m/roll
C-glass fiber
Certification :ISO9001

Our fiberglass self adhesive tape is made of high quality of fiberglass, it has high perfomance of alkali resisitence, flexibility, high tensile strength, deformation resistence and good adhesiveness, beacuse of the chemical stability of fiberglass. It is an ideal products for repairing the cracks and joints of drywall and gypsum board.

How to use:
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.