Welcome to B2BAGE
5V/7.5V~24V, SD Card LED RGB Controller
5V/7.5V~24V, SD Card LED RGB Controller

Minimum Order: 0
Quality/Safety Certification: 0.00


5V~24V, SD Card, LED RGB Controller
1, 5V~24V input
2, control Full Color LED Light
3, CE&ROHS
4, P9813IC,D705IC, 6803IC etc

T-2048 dots controller

1, Suitable to 32 grade-256 grade-4096 grade gray level control, software Gamma Correction.

2, Combined with video editing software LedEdit, it supports all various of rules, special shape and other point , line, surface light..

3, It is 1 port controller, each port can connect 512/2048 lights.

4, Could play the content in SD card.

5, “SET” save operation, “MODE” change effect animations, “SPEED+” speed+, “SPEED-” speed-

 Note: T-2048 dots controller, load 512/1024 lights each port, the playback speed can be up to 30 frames/sec; if it connect more than 512 lights each port, the frame rate would automatically reduce according to the number of lights.

 

Remark:
1, totally, no more than 2048 pcs Full Color LED Pixel Lamp(with IC) can be connected.
2, please take the side of lamp with black IC as signal input side to connect controller.
3, when pull out the SD card, please make sure that the power supply was turned off, or it will damage the programme in the SD card.
4, usually, each 300 pcs RGB pixel lamps can connect to power supply directly, to make sure that the lamps will get enough and uniform power  supply.
5, since the pixel lamp with IC, each lamp can be controlled.After programmed with special software and save into the SD card, you can make it show graphic, text, animation, video etc.

 

 

 

Connect to LED Pixel Light:

 

 

Connect to LED Digital Tube:

 

Projects:

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.