High votage led strip light :safe, inexpensive, energy efficient , long life span, easy installation ,very welcomed by cilents

High Voltage SMD3528 led strip light

Features:
1     Easy to install ,Safety , high Power saving ,long life span, waterproof, no pollution,green environmental protection,
3   life span: more than 50000 hours

4   High brigness, and colorful to choose

5   Soft and easy to crooking into differents shape for design, fit with electronic controller ,it can appears different lighting status.

6   Adopt constant current LED driver ,and the Power factor is 95%

7   Special electric circuit design ,in order to avoid the single one breakage and then effect the whole impression of the lamps.

8   The ambient temperature ranges from -30°to 50°

9      CE ROHS cetificates approval

Installation specification:

1 Confirm the local applications input voltage before install the led strip light.

2 In order to protect the led strip lamp from the damage of high-heat ,please make sure put it into energization in bunch and warm up for several minutes before installation. But don’t keep the warm up too long time.

3 Make sure don’t turn on the strip lamp before the installation finished .

4 Don’t knock the strip with heavy stuff during the installing.

5 Warm up the strip light before crooking into differents design.

6 Only can but cut off the section without circuit board.

7 Please make sure the cut off ends is tidy, in order to prevent short circuit.

8 Make sure the connection places to be firmly fixed, if the application in outdoor, try to keep it away from water and moisture, the connection places must be sealed up.

9 The fixity can not use iron wires as so on.

10 Keep the environment airiness in order to keep the strip lamp in good condition of heat dissipation,

Cutting Attentions:

1 The strip lamp can be cut into different lengths for clients requirement.

  But please make sure do not to cut off the circuit board in order to keep all the strip lamp working .

2 The transverse section must be tidy,and don’t leave any burr,in order to prevent the strip lamp from circuit short.

3 After the strip lamp to be cut off ,must fix the cut endings with closed end plug,also use the insulating tape to seal up the connecting places.

Three ways of the interconnections as below

 A. Power wires front ends connection way

 B  Intermediate head connection way

 C  Use PVC to seal up the cutting ends

Applications: Landscape lighting, domestic lighting, pools, spas, ponds, clubs, pubs, restaurants, hotels ,conference and stage lighting, commercial interior/exterior.