Low down time and high productivity.
Optimum hardness for wear resistance.
H13, M2, T1, D2, LD, 6CrW2Si(1.2550),...
Rods shear blade material:5CrNiMo,5CrW2Si,6CrW2Si,3Cr2W8V,4Cr5MoSiV1(H13)
This series of shear blades which is developed by our company , the life is above 3-5 times of the overall alloy tool steel bit , and may carry on the pre-protection and repair.
Standard specifications-Machine way Tolerances
closer tolerances are availablade upon request | semi-finished
| finished |
Dimensional | +/-0.003'' ,+/-0.075m | +/-0.001'', +/-0.025mm |
Matched thickness or width | 0.0015'', 0.04mm | 0.0005'', +/-0.013mm |
match at butt ends | 0.001'', 0.025mm | 0.00025'', +/-0.006mm |
twist | 0.002T.I.R,0.05mm | 0.001TIR, +/-0.025mm |
flatness | 0.0015/ft, 0.04mm/305 | 0.0005/ft 0.013/305 |
straightness | 0.0015/ft, 0.04mm | 0.0005/ft 0.13/305 |
squarenss | 0.0015'', 0.04mm | 0.0003'' 0.0075mm |
parallelisim | 0.0015TIR, 0.04mm | 0.0002TIR 0.005mm |
hole location | 0.001'', 0.025mm | 0.0005'' 0.013mm |
micro finish | 32, 0.8 | 8/16, 0.2/0.4 mm |
In order to serve and supply you better products,we sincerely hope that you could afford such information as below:
1)Detailed size or Dimension:Outer Diameter, Bore Diameter,Teeth Number,Thickness,Segment Size;
2)Segment Welding Methods:Laser,High frequncy,Hot press,Cold press
3) Base Body Materail: 9CrSi,Steel,or others
4) Your Quantity;
5) Your diagram;want to know.
6) any other information