turret type,can put six moulds at one time.
vertical type for punch,shear.
flatedge shear method
horizontal bending type
Turret Busbar Processing Machine ZTMX-503D
Usage:
This kind of machine is mainly used for different types of processing of copper or aluminium busbar.it is an ideal processing equipment for electrical appliance manufacture of high and low voltage.
Characteristics:
1.One machine can carry out processing of punching,shearing and bending at the same time or respectively.
2.Punching unit adopts turret type,can put 6 moulds at one time,improving efficiency.
3.Through changing tools,the machine can do special processing work such as pressing,embossing,pressing cable joint,twisting and so on.
4.We adopt vertical machining method for punching and shearing unit,so operation is flexible and convenient.using flatedge shearing method,so the work piece surface is neater and smoother.
5.Adopting horizontal bending type to achieve flat bending and vertical bending by changing tools
6.You can adjust working stoke of each unit conveniently to reduce machining auxiliary time and improve production efficiency.
7.There are 4 trundles. So the machine can be moved conveniently by adjusting them.
Technical parameters:
|
| ZTMX-503D |
Punching | Max power (KN) | 500 |
| Punching Diameter(mm) | 4.3~34 |
| Max thickness (mm) | 16 |
| Max width (mm) | 250 |
Shearing | Max thickness (mm) | 16 |
| Max width (mm) | 250 |
Bending | Max power (KN) | 500 |
| Max width (mm) | 250 |
Vertical Bending | Max width (mm) | 120 (12mm thick copper) |
Embossing |
| √ |
Pressing Cable Joint |
| √ |
Twisting |
| √ |
Outline Dimensions |
| 1500×1345×900 |
Power of Main Motor (KW) |
| 3×5.5 |
Accessories with machine:
4 sets of punching, 1 set of shearing, 1 set of flat bending, 1 set of vertical bending.