1With PLC automatic control system
2 full automatic
3possible to saw 16 pipes ,diameter 9.3mm'in one time .

1. Specifications:

This machine which is combined with Taiwanese techniques and other’s advantages is the best equipment for the processing of metal lighting accessories.

2. Technical data:

a)   Hydraulic pressure adjusting range: 15-30 KG/cm2

b)   Diameter of the vertical oil cylinder on the saw stand: 50mm, Maxium travel distance: 110mm

c)   Diameter of the oil cylinder for pipe holding: 40mm, Maxium travel distance: 30mm

d)   Diameter of the left/right oil cylinder for pipe holding: 32mm, Maxium travel distance: 30mm

e)   Diameter of the long oil cylinder for the stock feeding: 25mm, Maxium travel distance: 600mm

f )   Pipe clamping range for the saw: diameter:9.3,16 pcs/clamp; diametre: 11.7-12.2,12 pcs/clamp; diameter:16, 8 pcs/clamp. The clamp can be changed for big round pipes, oval pipes or square pipes. The pipe sawing return throw length for one time is 15-600mm,for two faces and three knives is 600-1200mm, for three times is 1200-1800mm.

g)   The saw shaft turning speed: 94 rounds/minute.

8)   The sawing speed should be set in reference to the pipe hardness and diameter, generally the speed is 30 seconds as a back throw for the sawing of dameter 9.3.