Chain link fence machine for manufacturing chain link fences of different sizes.
Chain link machine is also known as the chain link fence machine and the chain-link machine, for manufacturing chain link fences of different sizes.
Other keywords: chain link machine, chain-link machine, chain link fence machine, chain-link fence machine, chain link mesh machine, chain-link mesh machine, chain link fencing, chain link fence, chain link mesh, chain-link fencing.
The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.
Use compacting machine to make it into rolls.
Width scope of weaving | 0.5-4 m |
Diameter of wire | 2-5 mm (depend on the mesh size) |
Mesh Size | 30-80 mm |
Speed of the axle of shaped knife | 275-1100 rpm (variable speed) |
Power consumption | five motors, altogether in 8.9kW |
The output per minute for example | If the mesh is 50*50mm, width: 2m, the output will be: 1m/2min. |
Suitable wire to the machine | The tensile scope of the wire 300-500N/M*M |
Weight of equipment | 4200 kg |
Outside size | 6700*1430*1800 mm |