Welcome to B2BAGE
Fixed grid extractor in stainless steel
Fixed grid extractor in stainless steel

Minimum Order: 0
Quality/Safety Certification: 0.00


It is one of the most advanced extraction equipment.

Product profile:

It is one of the most advanced extraction equipment, compared with traditional false-bottom flat-rotating extractor,it remains following advantages: less power consumption, steady operation system,longer utilization time,convenient maintenance,good extraction effect,besides,it has many features as follows: more outputs,simple structure,few faults etc.

Main features:

Its structure is the most simple among the same type extractors.That fixed grid replaces false bottom reduces working structures,so faults are lowered,and safe operation efficiency is improved. It can self-clean,it mustn’t stop for cleaning fixed grid.It allows to increase materials extraction time,so residual oil content of meal is reduced.It can increase loading materials coefficient,and improve outputs.

 Main structure and operation principle:

  It is made up of shelf,rotor,fixed grid bottom,spraying device,basebed,major axle,transmission and mixed-oil bucket.Its operation principle is as follows: material cakes are sent into each material grid of the rotor by the seal spiral conveyer, There are racks on the outer ring of rotor,through transmission device, racks drive rotor to rotate at low speed around the major axle. Material cakes are sprayed with dense mixed oil in extractor for extracting fat. With extractor rotating,spraying with mixed oil which concentration is reduced in turn,oil content of material cakes is reduced further. At last, spraying with non-oil fresh solvent, oil content of material cakes is reduced to about 1%. Material cakes turn into wet meal,and fall into wet meal bucket through extractor meal-falling mouth after drying, Mixed oil is sent to the steaming system by oil bucket.

Main specification and technical data: 

Specification

JP200

JP220

JP280

JP350

JP400

JP480

JP600

Processing capacity (t/d)

10

20

30

50

80

100

200

Rotor diameter(mm)

2000

2200

2800

3500

4000

4800

6000

Rotor height(mm)

1200

1400

1600

1800

1900

1980

2200

Grid number

12

14

16

18

18

18

18

Power (kw)

1.1

1.1

1.1

1.5

1.5

2.2

4

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.