Welcome to B2BAGE
Q35Y Series Hydraulic Iron Worker
Q35Y Series Hydraulic Iron Worker

Minimum Order: 0
Quality/Safety Certification: 0.00


Iron worker
Passed CE,ISO,
1.Laser position for punching
2.Automatic holding device
3.Automatic temperature cooling system

Hydraulic Iron worker can cut and punch all kinds of materials such as plate, square bar, angle, round bar, channel and so on.

Hydraulic Iron worker  can also bend the plate below 500mm. All the components of Hydraulic Iron worker  are of the highest quality in their safty, function, capability and maintenance.

 

1.Punching

Full range of universal punches and dies are available.unique style allows for large angle iron punching and large channel punching.

Large viewing window on stripper swing away design for ease of operation.large two piece gauging table with rulers and stop as standard fittings.Quick change coupling nut and sleeve for rapid replacement of change.

 

2.Shearing

Round and square bar shear has multiple holes for a variety of sizes.Adjustable hold down device for round/square bar,channel/beam cutting.Large strong guarding for max safety.

The angle shear has the ability to cut angle at 45°both top and bottom leg.This gives the operator the ability to make a picture frame corner for perfect welds.Diamond shaped blade for quality cuts that is minimal material lost and deformity.

Easily adjustable hold-down device for accurate plate cutting.Large 15″squaring arm with inlaid scale.Special anti-distorted blade for quality cutting.Lower blade has four usable edges.There is screw allow for gap adjust no shim needed.

 

3.Notching

Unique design allows for cutting of angle and flat bar.Electrical interlock safety guard and three gauging stops for precise positioning.

 

4.Bending

Can also bend the plate below 500mm.

 

 

Machine Specification

ModelQ35Y-16Q35Y-20Q35Y-25Q35Y-30Working pressure (KN)55075011001400Max. cutting thickness (mm)16202526Max. cutting length (mm)400480600600Tensile strength of sheet metal (N/mm 2 )Below 450Below 450Below 450Below 450Shear angle (deg)7888Stroke of ram (mm)80808080(stoke times) (min)8888Depth of throat (mm)300355400600Max. Capacities (mm)25× 1630× 2035× 2538× 26Main motor (KW)45.57.511Length of machine tool (mm)1640186023552680Width of machine tool (mm)7307909601040Height of machine tool (mm)1770190020902300Weight of machine tool (mm)1700220048006200 
ProfileRound BarSquare BarEqual AngleT-BarI-BarChannel
90° shearing45° shearing90° shearing45° shearing
Q35Y-164540× 40125× 125× 1250× 50× 5120× 120× 1260× 60× 8126× 74× 5126× 53× 5.5
Q35Y-205050× 50140× 140× 1250× 50× 5140× 140× 1270× 70× 10160× 86× 6160× 60× 6.5
Q35Y-256050× 50160× 160× 1460× 60× 6160× 160× 1480× 80× 10200× 102× 9200× 75× 9
Q35Y-306555× 55180× 180× 1660× 60× 6180× 180× 1680× 80× 10280× 124× 10.5280× 86× 11.5

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.