1>ISO and CE quality assurance
2>light weight
3>long life time:10years
4>convenient application
Introduction
Model WLFM28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table
Working Flow
Decoiling the Sheet—→Sheet Guiding—→Film Covering—→Roll Forming—→Measure Lengh —→ Cutting the Panel—→Panels to the Supporter.
Technical Parameters:
Material | Colored steel sheet / galvanized steel sheet | |
| Thickness of coil sheet | 0.3-0.7mm | |
| Quantity of Stands | about 18 groups | |
| Material of cutting blade | Cr12 | |
| Main motor power | 7.5kw | |
| Hydraulic station power | 3 kw | |
| Hydraulic station pressure | 10-12Mpa | |
| Forming speed | 10--12m/min | |
| Controlling system | PLC,model S7-200,Siemens | |
| Index error of length | 36m | |
| The largest camber action | 10m+-2mm | |
| Voltage | 380V 3 phase 60Hz or according to buyer's requirement | |
| Total weight | 10MTS | |
Material of Main Equipment
| Roller Material | high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm |
| Active Shaft Material | high grade No.45 carbon wrought steel at Φ 75mm. |
| Cutter Blade | Cr12 mould steel with quenched treatment. |
| Electric Elements | Control system with PLC model S7-200,Siemins.transducer with ABB control panel with TP170, Siemens. It can input 10sets of spec at one time |
| Oil Tank Model | CB-E310 |
Component and Function
1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement.
2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool..
Designated use
1. Some final products for Automobile.
2. Some final products for Building, such as for Roofing / Ceiling / Wall materials, and dry wall (track and stud) material.
3. Some final products for Gate-Panel, Guard-Panel and sound insulation
| Terms: | ||
| 1. Delivery: in stock | ||
| 2. Package:Export Standard package in container | ||
| 3. Payment:TT(30% by TT down payment ,balance by T/T before shipment or irrevocable L/C at sight) | ||
| 4. Validity: good for 30days |
