complete sets of solar water heater equipment
Minimum Order: 0
Quality/Safety Certification: 0.00
complete sets of solar water heater equipment is used for manufacturing various solar water heaters capacity is between120-300L.
complete sets of solar water heater equipment is used for manufacturing various solar water heaters capacity is between120-300L.
1.According to customers' demands,we can supply complete sets of
equipments with different configurations,the annual output is between
5000-100000 sets.
2.The equipments can manufacture various solar water heaters of water
storage capacity is between 120L-300L.
3.We can supply all the panels, fittings and other Consumable materials
for production of solar water heaters.
4. we engaged in related technical guidance and training.
| Product Name | Uses | Size(mm) | Weight(KG) | Type of drive |
| Plate Shearing Machine | Shear inside and outside barrels of the plank. | 2200×600×1300 | 400 | stamp |
| 12T punch machine | The hole of inside, outside the barrel, vent, vacuum tubes hole stamping, flanging | 2200×600×1301 | 1000 | 1.5KW motor |
| Cover Circle Shears | Inside lid plank minus circle | 2200×600×1302 | 220 | 1.5KW motor and cylinder |
| Cover Molding Machine | Inside lid flanging forming | 2200×600×1303 | 180 | 1.5KW |
| Inner Barrel Grooving Machine | The internal vats reinforced roller, every 400mm rolling a long-plate | 2200×600×1304 | 320 | 1.5KW motor and cylinder |
| Automatic Water Heater Seam Weld Machine | Welding inside barrel straight slit and end caps. Don't need argon consumable items weld directly. Welding discoloration, rusty Straight seams, end caps weld by two electrodes no affection of each other | 2200×600×1305 | 380 | Cylinder and 50KW transformer |
| Flanging Machine | The edge of outer barrel bite folding pressure. | 2200×600×1306 | 160 | Hand |
| Beading Machine | Outer barrel frilled edge, with blank-holder machine bite, planish | 2200×600×1307 | 420 | cylinder |
| Shrink mouth machine | To let the lid buckle close to the external VAT, the external VAT on both ends to narrow down, and press a slot. | 2200×600×1308 | 720 | 1.5KW notor |
| Stitch Welding Machine | Before welding straight slit of the inner barrel, to avoid moving ,spot welding one time about 200m interval | 2200×600×1309 | 310 | 1.5KW motor and cylinder |
| Laminating machine | To avoid outer barrel board get dirty before product the outer barrel need paste a layer of film | 2200×600×1310 | 70 | Hand |
| Foaming Shelf | When foaming ,fix and locate inner and outer barrel | 2200×600×1311 | 120 | Hand |
| Mould | Vacuum tubes hole, inlet and outlet water, electricity heating holes, with full vent punching mould. | |||
| Foaming Machine | Use compressed air to pressure foaming materials injected into the internal and external barrels of clearance, then foaming filling, heat preservation. | 800×700×1100 | 200 | air compressor |
| Nut welder | To avoid leaking about the joint of in-out water pipe and inner barrel, can put special nut welding, in-out water barrel holes with threaded connections. | 900×600×1600 | 320 | 1.5KW motor and 30KW transformer |
