MG-811A Single Axis Copy Router
CE certification and SGS test

Main Features:

1. This copy router is equipped with template and milling cutter, capable of replicating complicated holes to the workpiece.

2. By adjusting the stopper at the left of the end milling head and the positioning bar on the profile bracket, you can mill rectangular holes.

3. All movements take place on the linear axis, while forming pin can rotate freely, allowing easy and flexible operation.

4. Startup switch is located at the control handle, and there is joint bearing on the handle for easy operation.

5. Adopts pneumatic clamping operation, high automation.

6. Rotate raising positioning block allows three different kinds of milling depths.

7. All linear movement bearings and milling cutters are from Germany, durable and smooth.

Main Technical Parameters:

1. Worktable size( W x H ): 512 × 170mm

2. Max. distance of milling head from left to right: 260mm

3. Max. distance of milling head from front to rear: 130mm

4. Max. space height of milling head: 100mm

5. Max. milling cutter diameter: Φ8mm

Min. milling cutter diameter: Φ3mm

6. Milling cutter rotation speed: 12,000 r/min

7. Motor power: N = 1.1kW

8. Motor rotation speed: 2,840 r/min

9. Working air pressure of profile pressing cylinder: 0.6~0.8Mpa

10. Overall dimension: (L x W x H): 640 x 660 x 1,400mm

11. Weight: 157kgs