China Perfect Magnetic Ore Separator
1 Permanent magnetic machine
2 High magnetic, low cost
3 Important for iron separation
Magnetic Ore separator mainly consists of such four parts as cylinder, magnetic system, cell and transmission parts. Magnetic separator is a new type high-efficiency magnetic pre-separation equipment for materials with big size, such as lump iron ore etc.
Cylinder is made of 2-3mm welded and bent stainless steel and the terminal cover is forged aluminum plate which is connected with stainless bolts. The motor drives the cylinder to go round and round through decelerated machine. The magnetic separator machine is open and put in the cylinder. The magnetic piece is installed on the bottom plate with stainless bolt, the axis of magnetic yoke spreads out of cylinder, and there is cranks which are fixed on the end of axis. The angle of magnetic system can be adjusted by pulling the crank, and be fixed with push rod. The working area of cell is made of stainless steel plate, and the other parts of frame and cell adopt common welded steel.
Specifications Models | CTDG 1515N | CTDG 1214N | CTDG 1210N | CTDG 1010N | CTDG 0812N | CTDG 0810N | CTDG 0808N | CTDG 0606N | CTDG 0505N | CTDG 0405N |
Technical performance | ||||||||||
Drum diameter(mm) | 1500 | 1250 | 1250 | 1000 | 800 | 800 | 800 | 630 | 500 | 460 |
×Drum length(mm) | ×1800 | ×1600 | ×1150 | ×1150 | ×1400 | ×1150 | ×950 | 750 | ×550 | x520 |
Applying belt width(mm) | 1600 | 1400 | 1000 | 1000 | 1200 | 1000 | 800 | 650 | 500 | 500 |
Magnetic Intensity On drum surface (mT) | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 | ≥3000 |
Ore diameter upper limit (mm) | 350 | 350 | 350 | 250 | 200 | 200 | 200 | 70 | 50 | 40 |
Capacity(t/h ) | 600-800 | 500 | 300-350 | 300 | 400 | 250 | 200 | 80 | 50 | 40 |