The biggest plate rolling M/c in China and even one of the biggest in the world, any type of plate roll, you can find all here.
Model | W12NC-80×2500 (4-roller Bending Machine) |
Max thickness of roll plate | 25mm |
Max width of roll plate | 30000mm |
Roller working length | 3100mm |
Plate yield limit | 260Mpa |
Roll Plate Speed | Around 5m/min |
Pre-bending Plate Thickness | 22 mm |
Straight plate for pre-bend | 2-2.5 times plate thickness |
Full load roll-made steel plate min. diameter | Φ1150mm |
Upper roller diameter(mm) | 540mm |
Lower roller diameter | 460mm |
Side roller diameter | 380mm |
Main motor power | 55kW |
Main features
Top roll device mainly consists of top roll, main oil cylinder, top roll bearing chock and double row roller bearing, etc.
Top roll provides pressure for bending; the working pressure of main cylinders is 19.5MPa.
Top roll is designed in a drum shape with equally spreader load of 70% of the maximum pressing force so as to preset the deformation deflection.
The top roll material is 42CrMo with refining treatment to 260~300HB.
Lower rolls device consists of lower roll bearing chocks, lower rolls and lower roll gears, etc.
This device works through a set of worm and worm wheel speed reducer model driven by a motor model. Torque is transmitted to two pairs of worm and worm wheel speed reducing mechanism. Worm wheel drives horizontal moving screw rod to move machine frame and realize horizontal movement of the top roll.
Top roll horizontal move device is designed for plate ends pre-bending of non-symmetric rolling.
Lower rolls material is 42CrMo with refining treatment to 260~300HB.
Support rolls device consists of support rolls, support roll bearing chocks, connecting frame and taper
Keys etc.
Support rolls can be adjusted up and down when bend rolling thick and thin sheet metal plates respective.
