Welcome to B2BAGE
continuous gas fired ageing Furnace (industrial furnace)
continuous gas fired ageing Furnace (industrial furnace)

Minimum Order: 0
Quality/Safety Certification: 0.00


This continuous gas fired ageing furnace is specially designed for heating and ageing treatment of castings.

Nanjing Nianda Furnace Science and Technology Co., Ltd supplies kinds of industrial furnaces to international market.

1. This continuous gas fired ageing furnace is specially designed for annealing treatment of cylinder block after casted into shape.  It has high thermal efficiency (remain temperature of hot casted cylinder block is 300~400), and energy saving. Compare with traditional annealing furnace, it can save energy about 30%~40%. Equipped with most advanced automatic control system, the equipment is easy for operation, only 1~2 operators are required during normal production. Centralizing control room and PC control system is designed with this production line.  Man-machine interface enable operator can be easy to control the whole equipment. Technical parameter can be edited, revised, stored in PC. It has perfect self diagnosis, self inspection and failure alarm function.

 

2. Main Technical Parameter

No.

Item

Technical Data

1

Production Rate

Cylinder Block 70pieces/h

2

Cooling Water

Temperature   ≤30

Pressure    0.1~0.2MPa

Flow Volume: 35m3/h

3

Cycle

6-8min/trolley

4

Loading Capacity of Each Trolley 

Cylinder Block: 9 pieces / trolley

(upper layer : 4 pieces, bottom layer: 5 pieces )

5

Bottom Dimension of Trolley

2400×1200mm

6

Trolley Number

129 sets

 

7

Ambient Temperature

0~40

 

3.Working Procedure:

Cylinder blocks are loaded on trolley by robot;

Horizontal transfer trolley delivers cylinder blocks to feeding position before annealing furnace;

 Annealing furnace door open;

 pushing machine pushes trolley and workpieces inside of annealing furnace chamber;

 Annealing furnace door close, start to heating and ageing,

 Workpieces cooled inside of furnace chamber;

    Back door open;

    Pulling machine pulls workpieces and trolley out of furnace chamber;

    Back door close;

    Horizontal moving bogie forwards moves to feeding position of slow cooling zone;

    Door of slow cooling chamber open;

    Trolley and cylinder block are pushed inside of slow cooling chamber;

    Door of slow cooling chamber close, and start to forced cooling;

    Discharge cylinder block;

    Separate empty trolley;

    Scratch sand on empty trolley;

    Empty trolley is delivered to lateral moving bogie by pushing machine;

    Cylinder blocks are loaded on trolley; and waiting next cycle.

4 equipment configuration

No.

Item

Quantity

1

Continuous annealing furnace

1 set

2

Continuous cooling chamber

1 Set

3

Lateral Moving Bogie

2 Sets

4

Hydraulic Pulling Machine

2 Sets

5

Hydraulic Pushing Machine

2 Sets

6

Loading Trolley

129 sets

7

Hydraulic Pump Station

1 Set

8

Electrical Control System

1 Set

9

Scratch Sand Device

1 Set

10

Combustion System

1 Set

 

 

 

 

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.