1.IGBT module
2.High heating speed.
3.Save energy .
4.Easy to operate
Usage: annealing,hardening,forging,brazing
High Frequency Induction Annealing Machine
High quality, low cost, rewading trust !
Your induction heating technology partner
LIPAI induction heating machine
1)Heating fast
this is the heating rate of less than 1 second (speed adjustable speed control)
2)Heating wide
wide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop)
3)Easy installation
connect the power, induction loop and out of the water can be used; small size, light weight, easy to use
4)Simple operation
a few minutes to learn
5)Start fast
you can start with water after the heating power
6)Low power consumption
high-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts
7)Good effect
the heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste
8)Adjustable power
The Promise adjust the output power
9)Protection all
with over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection
Annealing equipment:
1. Annealing whole or partial all kinds of machinery parts.
2. tension and annealing stainless steel container which within diameter 300mm.
3. heating and bending the plate spring of automobile.
4. hot riveting impeller, heating and hot rolling steel tube, hot rolling twist drill.
WH-VI-120 induction annealing machine ,induction heating machine
Work power : three-phrase four-wire 350V/50Hz
Working voltage range (AC):342V-420V
Max input current : 165 A
Max output power :120 KW
Size :host 650*520*1100mm transformer 500*800*580mm
Weight : host 85kg +/-5% transformer 90kg +/-5%
standard | Input power | Input voltage | Oscillation frequency | Volume mm3 | efficiency | Particular recommended |
WH-VI-30 | 30KW | 380V 50-60HZ | 30-60KHZ | 580*280*510 | 90% | Drill rod heated |
WH-VI-40 | 40KW | 380V 50-60HZ | 30-60 KHZ | 460*360*630 | 90% | Small quenching |
WH-VI-50 | 50KW | 380V 50-60HZ | 40-60 KHZ | 590*450*780 | 90% | Standard quenching |
WH-VI-60 | 60KW | 380V 50-60HZ | 20-60 KHZ | 590*450*780 | 90% | Nut forging |
WH-VI-80 | 80KW | 380V 50-60HZ | 20-60 KHZ | 650*520*1100 | 100% | Gear quenching |
WH-VI-120 | 120KW | 380V 50-60HZ | 10-60 KHZ | 650*520*1100 | 100% | Camshaft forging |
WH-VI-160 | 160KW | 380V 50-60HZ | 10-35 KHZ | 650*520*1100 | 100% | 600gear quenching |
We uphold "first quality ,first customers,first service"
Welcome to contact us to learn more about LIPAI induction heating machine .
