Wide range applications in nitrogen boosting, CNG refueling station, HP air compressor sets etc.
High precise couple-free, balanced design minimizes vibration, crankshaft fatigue, bearing bush load, increasing service life as a result;
Frame: One piece, cast iron heavily ribbed casting with tie-bolt construction Aluminum top cover and end covers;
Crosshead: one piece ductile iron, Babbitt surface;
Bearing: Accurate, split tri-metal, main and connecting rod bearings, steel backed and connecting rod caps are held in place by 2-bolt or 4-bolt;
Connecting rod: 4140 steel, precise machined and balance weight, the oil passage in rifle drilled hole for pin lubrication;
Crankshaft: Forged or heat-treated SAE4140 steel with nitride treatment. Balanced weight ensures a long stable operation service life. Distance from centerline to bottom of frame is 10.25 in. (26cm);
Maximum speed 1800 rpm, Maximum discharge pressure, 37Mpa;
Wide range applications in nitrogen boosting, CNG refueling station, HP air compressor sets etc.
Model | CFA32 | CFA34 |
NO. of throws | 2 | 4 |
Speed range | 850~1800 RPM | |
Maximum discharge pressure | 37MPa(5280psi) | |
Drive mode | natural gas engine / electric motor / diesel engine | |
Frame HP@1800RPM | 216kw(290hp) | 432kw(580hp) |
Piston stroke | 76 mm(3in) | |
Rod diameter | 29 mm(1.125in) | |
Piston speed@1800RPM | 4.57 m/s(900fpm) | |
Lube Oil Flow | 38 L/min(10gpm) | |
Dimension(Width*Length) | 2490mm×810mm(8’2” ×2’8”) | 2490mm×1420mm(8’2” ×4’8”) |
Frame Wt. w/Crosshead Guides | 544 kg(1200lb) | 907 kg(2000lb) |