Welcome to B2BAGE
Automatic Cable Arrangement Winch
Automatic Cable Arrangement Winch

Minimum Order: 0
Quality/Safety Certification: 0.00


JC-1000 Automatic Cable Arrangement Winch together with JCK-1 Winch Controller is specially equipment, which is developed for th

JC-1000 Automatic Cable Arrangement Winch JCK-1 Winch Controller

 

1. Application 

JC-1000 Automatic Cable Arrangement Winch together with JCK-1 Winch Controller is specially equipment, which is developed for the requirement of field logging. This equipment can promote or put down the logging probe in the borehole, and has the functions of adjusting running speed by manual or automatic control,   constant speed control, measurement for special location or consecutive, automatic calibration depth, alarm for depth abnormal change.  The equipment is manufactured according to the standard (DZ/T 0196.8 1997 < well logging instrument>) that issued by department of geology and mineral resources of the People's Republic of China (PRC), and is suitable for application to geology, metallurgy, coal, oil, and other drilling engineering, especially to deep hole logging.

 

2. Technical Specifications and Characteristics 

2.1 JC-1000 Automatic Cable Arrangement Winch  

2.1.1 Speed range:           (0~30)m/min

2.1.2 Depth range:            (0~1200)m

2.1.3 Control mode:          Accord to JCK-1 Winch Controller

2.1.4 Operation temperature:   (-10~70)°C

2.1.5  Working voltage:        AC 220V±10%,50Hz

2.1.6 Motor power:           1100 W

2.1.7 Weight:                110 kg(Not including cable)

2.1.8 Size:                  700mm×550mm×700mm

2.2 JCK-1 Winch Controller 

2.2.1 Speed range:           (0~30)m/min. By manual or automatic control

2.2.2 Constant speed control range: (0.5~20)m/min (error ±5%)

2.2.3 Depth range:           (0~9999.99)m (error ±0.4‰)

2.2.4 Control mode:          manual, automatic or check

2.2.5 Running direction:       up or down

2.2.6 Measure mode:         special location or consecutive

2.2.7 Depth signal:           RS232 or pulse signal

2.2.8 Operation temperature:   (-10~55)°C

2.2.9 Working voltage:        AC 220V±10%,50Hz

2.3 Technology characteristics

2.3.1Running controlled by manual or automatic, constant speed control, measurement for special location or consecutive, depth  calibration.

2.3.2 Easy to operate, and control by automation, constant speed achieve level A standard of ‘DZ/T 0196.8-1997’.

2.3.3 Automatic braking if power is off,and automatic stopping if the speed changes abnormal.

2.3.4 When promote by hand operation if power is outage, automatic braking function of the equipment is on.

2.3.5 Liquid crystal display, humanized operation, and real-time information presentation.

 

 

 

 

 

Related Products
Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.