Welcome to B2BAGE
Direct driven screw pumps
Direct driven screw pumps

Minimum Order: 0
Quality/Safety Certification: 0.00

Low speed with great torque;
Scalable remote module
Especially suitable for Barren Wells,Thick Wells,Gradient Wells and Hori

Performance characteristics of Control system

  Input voltage range: 380V±15%
  Input frequency range: 47~63Hz
  Control mode: Vector control with PG (VC), sensorless vector control (SVC), V/F control.

  Speed accuracy: ±0.1%~±1%

  Environmental temperature:-45°C-65°C, Ultra-low temperature protection

  Stepless speed regulation: 0~200r/min

  Anti-reverse function: Emergency braking and Energy bleeder function

  Fault protections: Protect from over current, over voltage, under voltage, phase failure, over     load, speeding etc

  Protection grade: IP53,Outdoor all-day run


Performance characteristics of Motors:

  Insulation grade: F

  Protection grade: IP53,Natural

  Vibration grade: Vibrational Acceleration of 5G

  Installation mode: Flange installment and hollow shaft

    Using temperature: -30~+50°C

    Keeping temperature: -45~+70°C

  Humidity : <95%

  Standard altitude: Below 2000m

      (Decreasing 20% above every 1000m  )

  Feedback element: Coder

  Rated speed: 200rpm

    Noise: <45dB(1 meter from the electricity)

  Product Specifications:

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.