LED digital flex strip with LPD6803
30leds per meter
Digital color change
7.8w per meter, IP65 protect
2 years warranty
LED digital flex strip with LPD6803
SMD 5050RGB Dream color IC6803 30 pcs per meter led flexible magical strip
Model No: TA-RGB30-F4
-Flexiblity. TA-RGB30-F4 can be bent at any angle.
-Digital color change. The builti-in programs release the auto-run modes for color change patterns.
-Strong humidity resistance which allows the strip exposed to be applied as an aquatic product.
-Abundant color modes. Up to thousands of color change modes can be put in the programs.
-Vivid color effects. All individual LEDDs are red, green and blue 3-in-1 type.
Electrical/Optical Characteristics TA= 25°c
Model No. | Length Width(mm) | LED quantity | LED Type | Light output | Beam Angle | Voltage(V DC) | Current (Amps) | Max. power Consumption (W) |
TA-RGB30-F4 | 5000*12 | 150 | SMD LED | 150*1500 | 120° | 12 | 2.6~3 | 36 |
LED source: SMD 5050RGB LED
LED quantity: 30 pcs/ m ,3 LEDs as a group, cuttable
IC quantity: 8 pcs 1812IC per meter
Wavelength:
Red: 625-630 nm, Green:515-520nm
Blue:465-470nm, yellow:590-595nm
Input voltage: DC12V
Controller Input Voltage: DC12V
Amplifier Input voltage: DC5V
Power Dissipation: 7.5W/m
Change Modle: 94 kinds with our controller
Waterproof Material: Epoxy(Covered on the surface, IP65)
Waterproof MAterial: Epoxy + Silicone Groove(IP67)
Glue Sealed (IP68)
Standard Packing: 5m / reel, w/ 3M tape on the back
Weight: 227g/ reel
Packaging details: carton packing 570*470*270(nm)
Difference:
Uses super bright 3-in-1 SMD RGB LEDs as the light source. With help of the built-in Microchips on the ribbon,
the LEDs long life sapn and color consistency can be maintained. TA-RGB32-F4 produces a hundreds of patterns of color synchronization, sequence, advancing. rolling and flash.
To realize the various effects, Dear color LED controller is needed, which brings the effects of color flowing,chasing, rolling, advancing, replacing, strobe etc.this products have two parts,one is the main controller,one is the "remote-control unit",the "remote-control unit" not only has the color key,but also has some flash model keys!
The led Amplifier for SMD5050RGB IC6803 led flexible strips:
the controller can work with power amplifier to expand the power output, realizing infinite power expansion to connect any quantity of LED lights
Using introduction:
This type of led strips can be cut by every group, so you can get the just length you need, the 5050 strip light have brightness and can be used for car, house decoration, and every place need decorated! If you have interests, please contact me, we will give you the plan, and help you make your life more beautiful, welcom.
LED strip picture:
LED controller:
Signal Amplifier:
Installation
It has a 3M self-adhesive backing so is easily applied to most smooth surfaces by simply removing the backing paper.
1) Clean the surface where you plan to attach the flexible strip light, Ensure there is no dust or oily material on the sticking space.
2) Peel off the 3M tape from the backside of the ribbon.
Place the strips on the contour and slightly press the front of the strip, so the strip can firmly attach on the surface.
Application:
Note :
1. please make LED drivers compatible with high output led strips before use LED strips.
2. Before use,first check the power supply used in compliance with of the power requirements.
3. Each roll ask for independent power supply;not to use of multi-volume series use.
4. Keep the surface of installation clear and level avoid breaking off.
5. Please keep the product under the anti-static shielding when installation, DO NOT use the sharp tool to touch the product.