3 ply inner layer tape
SGS test report
Meet ASTM D 1000, DIN EN 12068
Good quality ,best service,fast delivery
Inner Wrap – 3 ply Tape :
Three ply tape consisting of stabilized polyethylene backing with plastic butyl rubber adhesive layer on both sides. The consistency of butyl rubber on one side should be formulated in such a way that under tension, it flows on uneven steel surfaces. The inner wrap tape must be fully compatible with the property of primer and the property of outer wrap. The tape must be self amalgamating between the layers and at overlaps. Highly conformable to any surface structure by thick butyl rubber layer facing pipe surface.
Mechanically highly resistant tape system ( stress class C-50 according to DIN 12068)
Practically impermeable to water vapour and oxygen.
It should provide resistance to soil bacteria and soil electrolyte.
Compatible with coatings from PE , PP FBE , CTE and bitumen/ coaltar.
Tensile strength –at 23 0C > 100 N/cm as per EN 12068
Elongation at Break at 23 0 C % > 600 % as per EN 12068
Di electric strength KV/ mm > 30 as per ASTM D-149 / DIN 30672
Peel strength as per EN 12068
Cathodic disbandment < 20 mm radius as per EN 12068
Resistance to indentation at +50 C > 0.6 as per DIN 30762