Inductors
1.Low-profile Power Inductors with Inductance Ranging from 1 to 1,200uH
2.Similar to coil craft a

  inductors

 

 

Low-profile Power Inductors with Inductance Ranging from 1 to 1,200uH 

 Specifications:

Low profile power inductor Low DCR leaded power inductor Large-current SMD power inductor SMD magnetically shield power inductor Shielded SMD power chip inductor Magnetic shielded surface mount inductor with high current rating Low profile and shielded very effective in space-conscious applications Low resistance to deep power loss minimum Operating temperature: -20 to 85 degrees (contain heating coil) Appearance inspection: no external defect by visual inspection Terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions. Terminal should not peeled off Heat endurance of reflow soldering: 240 Insulating resistance: over 100M Ohms at 100V DC between wire and core Dielectric strength: no dielectric breakdown at 100V DC for one minute between wire and core Temperature characteristic: Inductance coefficient (0 to 2,000) x 10-6/(-25 to +80) inductance deviation within +/-5.0%, after 96 hours Humidity characteristic: in 90 to 95% relative humidity at 40+/-2 and one hour drying under normal condition. Inductance deviation within +/-5.0% after vibration for one hour Vibration resistance: in each of three orientations at sweep vibration (10-55-10Hz) with 1.5mm p-p amplitude Similar to coil craft and Toko, Sumida, TDK and Murata brands