Camera Module Features:
1) 1.3 Mega, 2.0 Mega, and 3.0 Mega Pixels available
2) 1/2" CMOS sensor, USB 2.0 high speed port

3.0 MEGA PIXEL CAMERA MODULE SPECIFICATIONS
Array Element: 2048x1536(QXGA)
1024x768(XGA)
Pixel Size: 3.18μmx3.18μm
Image Area: 6.59mmx4.90mm
Lens Size: 1/2
Output: 10-bit digital RGB Raw Data (Original Data)
Max. Frame rate: 7.5 fps for QXGA
20 fps for XGA
Electronics Exposure: 1550:1 for QXGA
780:1 for XGA
Scan Mode: Progressive
Sensitivity: >1V/Lux-sec
S/N Ratio: 46dB
Dark Current: 0.5 at room temp/30 mV/s
Dynamic Range: 60dB(due to ADC limitations)
Power Supply: 1.8 VDC +/- 5% (Core) and 3.3 VDC +/- 5%(Analog)
Power Requirements: <100mA (Active)
<50mA (Standby)
USB Signaling Speed
FX2 operates at two of the three rates defined in the Universal Serial Bus Specification
Revision 2.0, date
Full speed, with a signaling bit rate of 12 Mbps
High speed, with a signaling bit rate of 480 Mbps
FX2 does not support the low-speed signaling mode of 1.5 Mbps.