Welcome to B2BAGE
Ceramic Corrugated Structured Packing
Ceramic Corrugated Structured Packing

Minimum Order: 0
Quality/Safety Certification: 0.00


7 years Manufacturer of Ceramic Structured Packing.
Acid Resistance: >99.8%
Max Operate Temprature: 1400celcius
ISO9001:2000

XINTAO Ceramic Structured Packing

 

Introduction:

 

Ceramic Structured Packing consists of many packing units of similar geometric design. Corrugated sheets placed in parallel formcylindrical units called corrugated tower packing. These are a form of highly efficient packing with separating efficiency several times higher than that of loose packing. They have the quality of low-pressure drop, increased operating elasticity, minimum amplifying effect, and maximum liquid treatment compared to loose tower packing.

 

Chemical composition

SiO2

Fe2O3

CaO

Al2O3

MgO

Other

≥72%

≤0.5%

≤1.0%

≥23%

≤1.0%

2%

 

Physical property

Index

Value

Specific gravity(g/cm3)

2.5

Water absorption(wt%)

≤0.5

Acid resistance(wt%)

≥99.5

Loss in burn(wt%)

≤5.0

Max. operating Temp.(Degree C)

800

Crush strength(Mpa)

≥130

Mohs Hardness(Scale)

≥7

 

Geometric characteristic

Spec.

Specific Surface (m2/m3)

Bulk Density (kg/m3)

Void Ratio (%)

Pressure drop (mmHg/m)

250Y

250

420

80

2

350Y

350

470

78

2.5

400Y

400

500

75

3

450Y

450

520

72

4

550Y

550

620

74

5.5

700Y

700

650

72

6

250X

250

380

80

2.5

350X

350

450

78

3

400X

400

480

75

4

450X

450

500

72

4.5

470X

470

440

75

5

550X

550

620

74

5.5

700X

700

650

72

6

 

Advantage
1) High capacity. New tower design may reduce diameter, while renovate old towers may increase capacity significantly.
2) High separation efficiency. Since it has much larger specific surface area compared to random packing.
3) Low pressure drop, which leads to reduce energy consumption largely.
4) Large flexibility, and scale effect is not obvious.
5) Suitable for all tower diameters.
6) Strong resistance to corrosion of acid and alkali, especially to H2S, naphthenic acid and Cl-

 

Applications
1) Rectifying organic halide.
2) Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number.
3) Applied in some towers that contain a large quantity of natural media used to absorb nitric acid and concentrated sulfuric acid, as well as for purifying the air in chemical plants.
4) Operating in vacuum conditions at a bottom absolute pressure of 100pa.
5) Used in heat exchanger and demisting, or as a catalyst carrier.

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.