Emulsification Equipment
The pot cover adopts hydraulic lift.
We are capable of design and make as per your required.

Working Process: The materials are heated and mixed in water pot and oil pot to be fully reacted. Sucked into emulsifying pot by vacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then,the materials are sent to the cut-off mixing until where they are finally crushed into small pellets of 200μm~2μm. Besides,because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material. Item   DYEM5DYEM10DYEM30DYEM50DYEM100DYEM150DYEM250DYEM350DYEM500DYEM650DYEM1000Emulsifying Pot           Design Volume(L)61235631201652503505006501000Capacity(L)5103050100150200280400520800Scraper Stirring Power(KW)0.180.180.750.751.11.11.52.2337.5Scraper Stirring Speed(rpm)     10-120   5-60 Cut-off Mixing Power(KW)0.550.551.51.53345.57.57.511Cut-off Mixing Diameter50508080100100125125150150250Cut-off Mixing Speed(rpm)     1000-3300     Water Pot           Design Volume(L)3620357095130170300400600Capacity(L)2.5517286085100130250320480Stirring Power(KW)0.0150.0150.180.370.550.550.750.751.11.11.5Stirring Speed(rpm)     60-1000     Oil Pot           Design Volume(L)3615205070130200250300500Capacity(L)2.5513224065100160200240800Stirring Power(KW)0.0150.0150.180.370.550.550.750.751.11.11.5Stirring Speed(rpm)     60-1000