Cone crusher:
1. Strong crushing ability
2. Full automatic hydraulic system
3. Types of crushing cavity

this cone crusher of PYG series, combining the technology of single-cylinder cone crusher and PYFcone crusher,is the new type of cone crusher by adopting the advanced and optimized idea of design, owing to the use of better crushng frequency and eccentric distance,thus the content of fine graininess is much higher, and the content of thegranularity less than the discharge opening on closing edge may reach 80%,as highly improved, and the comprehensive energy consumption lowered.

due to the successful combination of crushing chamber of higher performance with higher crushing frequency, its handling princple by layers.consequently the shape of the product to be crushed is mostly cubic structure,and to a great extent to reduce the quantity of the needle and flaked shape of material.

this machine,adopting the whole hydraulic operation, is easy for operation and realization of automatin, and the reliability and life performance are highly improved.

the simple construction accounts for its easy operation and maintenance, quick and convenient adjustment of discharge opening,and the easy and quick replacement of the liner plate helps to reduce the down time and manpower.

this machine is operated reliably with extremely low rate of trouble.

due to the optimizing design and hydraulic protection of this crusher,the rate of trouble has been highly reduced, and the rate of non-trouble operation can be expected to exceed 85%.

NOTES:

1.the producing capacity indicaed in the table largely depends on the feed size,type of crushing chamber, density of material,cleanness of material and water content.

2.the minimum discharge opening refers to the minimum discharge opening that can be realized without causing support sleeve to jump. it is related to material.and subjuect to variation.

3.the producing capacity can be attained only nder the condition of open flow, and when compression strength is 140MPa,the water content not more than 4%,the oversize and undersize not more or less than 10% and the load of motor between 85%-90% of full load as well as even feeding,

4.the four digits in the model means:the first two are 1/100 of the diameter of the crushing cone,and the rest are 1/10 of the size of the discharge opening on open edge.

5.the date is subject to variation without further notice. 

Update Date:2010-12-24 21:20:16