This equipment is made up of main machine, screw/mould and some other assistant machines.It can produce hard quality pipes.
GY-GJ-PVC/ABS/PP/PE/PC/475 Hard Tube Making and Abnormal Profile Unit
Use:
This equipment is made up of main machine, screw/mould and some other assistant machines.It can produce hard quality pipes, such as PVC , ABS , PP , PE , PC , 475 ,etc.
Characteristics:
1. According to the need of customs and the design of mold, it can make all kinds of plastic hard tube and profiled products.
2. The screw adopted high ability of plastic molding design. So it is high yield, well plastic molded, smooth surface and high rate of good products.
3. The machine adopts vacuum water-cooling system, so it is environmental and energy-saving.
4. The mould head is simple , so it is convenient when change it and adjusted the warp.
Technical Parameters:
Specification | 45 | 65 | 90 | 120 |
Diameter of the tubemm | Φ8-Φ25 | Φ16-Φ50 | Φ50-Φ120 | Φ75-Φ160 |
Vacuum Pressurempa | 0.3-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
Main Electric Powerkw | 5.5 | 11 | 18.5 | 30 |
Production Speedm/min | 0.3-3 | 0.3-3 | 0.3-3 | 0.3-3 |
Productivitykg/h | 10-30 | 20-40 | 30-70 | 40-90 |
Traction Powerkw | 0.55 | 1.1 | 2.2 | 3 |
Length of the product linem | 10 | 13 | 15 | 18 |
Length of the water coolermm | 1200-2000 | 2000-3000 | 3000-6000 | 4000-6000 |
Cooling mode | Cycle Water-soak | Cycle Water-sprinkle | ||
Length of the product linemm | 11000 | 12000 | 15000 | 18000 |