1.Continuous Output: rated value
2 minutes: rated value x 1.3 times
3. Inst: rated value x 2 times
JD-C DC-AC Car Inverter
Output voltage waveform
The output wave form of JD-C inverter is modified sine wave .It is stable and suitable for various electric appliance .Note: the output voltage measuring error is about 20V by using general digital meter or analog meter.
Installation and connection
Connect the inverter to a adequate (or DC power supply) which can provide enough current.
The current rating of the DC power supply should be as following: Ir=PL/10
Where PL is load power or electric appliance power E.G. PL=1000W,then Ir =100/10=10A. that is the DC power supply for the inverter must have 10A current ranting or more than 10A.
Turn on the power switch, the indicator lighting means the inverter run normally. Then insert the load plug into the AC output. Caution: some mickel-cadmium cell charger will be charger will be damaged if it is used with the inverter.
The following product may have this problem:
Mini electric appliance with rechargeable battery that can be charged with AC power directly, as flash lamp, electric shaver, emergency lamp etc.Some chargers are forbidden with the high voltage load, such as the battery in mini tools.Mini power supply with capacitor for voltage step-downTechnical specification
Continuous Output: rated value 2 minutes: rated value x 1.3 timesInst: rated value x 2 times Output voltage: 220VOutput frequency: 50HZ Input voltage: rated value + - 25% Output waveform: sine modulated PWM Electric energy convert efficiency:87% No-load loss: less than 0.5