Steel Rules
Cutting Rule:Cross Camber< 0.05mm,Straightness< 0.5mm/1000mm,Flatness <5mm/1000mm

Steel Rules

Cutting Rule:Cross Camber< 0.05mm,Straightness< 0.5mm/1000mm,Flatness <5mm/1000mm

                        Length(1000)*Height(23.80)*Thickness(0.45,0.53,0.71,1.05,1.42,2.10)/piece

                        Body Hardness HRC 40-54,  Edge Hardness HRC 42~54

                        Any angle of blade is available upon request.

Wave Edge:762*23.80*0.7/piece

Notching Rule: 1000*23.80*1.05/piece,1000*23.80*1.42/piece

Creasing Rule: Cross Camber <0.05mm,Straightness <0.5mm/1000mm,Flatness< 5mm/1000mm

                            Length(1000)*Height(23.30,23.24,22.90)*Thickness(0.71,1.05,1.42,2.10)/piece

                            100M*Height*Thickness/coil

Perforating Rule:Height tolerance ±0.04mm Hardness HRC50 ºc Thickness0.71(2pt),1.O5(3pt),1.42(4pt)

Label Rule: Cross Camber-0.01mm,Straightness 0.3mm/1000mm,Flatness 3mm/1000mm,Height tolerance±0.02mm

                     Length(915)*Height(7.0,8.0,9.5,12.0,23.80)*Thickness0.45/piece

                     100M*height*0.45/coil 

ContinuousStationeryPerforating:

Cross Camber-0.02mm,Straightness 0.05mm/500mm,Flatness 5mm/1000mm,Height tolerance±0.04mm

Length(500)*Height(16,23.24)*Thickness0.71/piece

Other:

Hollow Punch,Punch for Label,Spring Punch,Punching,Plane Punch,Butterfly Punch,JIT SAW