Welcome to B2BAGE
HD universal Ku-band single LNB in Low noise high gain-RENQIU BEIFANG
HD universal Ku-band single LNB in Low noise high gain-RENQIU BEIFANG

Minimum Order: 0
Quality/Safety Certification: 0.00


HD universal Ku-band single LNB Low noise high gain
1)Style:single,twin,quad,octo
2)Price:$1.6-7
3)best after sales service

HD universal Ku-band single LNB Low noise high gain

 

1.Specification

Ku band LNB

F/D Ratio

0.6

 

Input Frequency Range

 

10.7-12.75GHz

 

Input Interface

 

waveguide WR-75

 

Conversion Gain

 

65dB(Typ.)

 

Noise Figure

 

0.3dB(Typ.)

 

Cross Pol.lsolation

 

20dB(Typ.)

 

Image Rejection

 

45dB(min.)

 

Gain Flatness

 

+-1dB/36MHz

 

L.O. Frequency

 

9.75/10.6GHz

9.75/10.75

 

L.O.Phase Noise

 

-70dBc/Hz@10kHz

-90dBc/Hz@100kHz

-110dBc/Hz@1MHz

 

L.O. Frequency

Stability

+-2.5MHz@-40 to +60

 

Output Frequency Range

 

950-2050

/950-2150MHz

 

Output Connector

 

75ohms F type female

 

Output Power

(at 1dB gain compression)

 

0dB(Min.)

 

Band Switching

Pulse

 

0/22kHz tone

 

Polarity Switching Voltage

 

V:12-14.5

H:16-18

 

D.C.Current

Consumption

 

160mA(Max.)

 

Operation Temperatuie

 

-40 to +60

 

2.How to test

I think my LNB is faulty. How can I test it?

The only way to fully test an LNB is to fit it to a suitably aligned dish and connect a satellite receiver. Then check to make sure every channel is there. If no channels are missing and if it continues to work through a hot day and a cold night, the LNB is fine.

However, if some channels still appear to be missing (with a known good LNB), this could be the fault of the cable (bad connection, water ingress or kinked or wrong type), the receiver or the dish (distorted or misaligned) or local interference (DECT phone, car radar detector, etc.). So then you need to use a process of elimination by swapping the dish, the cable and the receiver (for a different make/model as some receivers won't work correctly with some LNBs). Note that some wall-plate connectors can also cause "channels missing" problems and some electronic devices (DECT 'phone base stations, "Snooper" type radar detectors and microwave ovens) can cause similar problems. I've even had it reported that a bad battery connection in a laptop computer wiped out some channels!

 

3.Workshop

 

4.Packing

 

5.Exported loading

 

6.Application of LNB

 

Renqiu Beifang  Electronic Communication Co.,Ltd.

Contact person : Ms.Susan Wang

Alibaba trade manager: cn200480101

 

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.