1.Make the biggest yield rate
2.Feeding conveniently
3.Environmental
4.Good dust extraction
JZG 056 High effective and Great stability waste gas incinerator
WE are always devoting to do this field of Environments and renewable energy
With the development of the society ,plastic material things is in everywhere.It is very convenient to use plastic goods,That also take many problem.
This project is good to society.You also can get benefit from this project.
Information about waste gas incinerator
oil yield
How much oil you get that depend on two factor.
One factor is the different raw material.
One factor is the different cooling method.You will get different quantity oil when you use different cooling method.
So the quantity of oil you want to get that will according to different factors.
So our machine own the good cooling system.
reates an alternate source of energy to replace petroleum products and natural gas.
For big tires
(1The entire tires are possible to be put into reactor.our reactor is enough big for the whole tires.
(2After the whole processing ,We will make the reactor cool for about 1~2 hours.When the reactor cool down 70~80degree,We will make the reactor run again.The carbon black and the steel will be deliverily by the slagging system.
(3We are specialized in manufacturing waste tires,waste rubber,waste plastic recycling plant in China.We product 5/8/10tons daily capacity(4Our machine will produce one cycle.The most capacity is 10tpd.Two days that will produce 3 cycles.
Process time
——16~18hours
Process | Hour |
Loading time | 2h |
Fuel burning time | 4~6h |
Cooling time | 6~8h |
arbon black & steel wire slagging | 1~2h |
Security
The main equipment is of high safety.
The phase of the unliquefizable waste gas produced during the process is alkyl from C1to C4,
which is dangerous when burning directly. In our process, it is transferred first through a water close device and a safety device- burning air muzzle.
Before burning, we should ensure the safety of production.)
Specification
NO. | Item | Content | ||
1 | equipment’s model | YL-05 | YL-08 | YL-10 |
2 | Machine dimension(mm) | D2200*L5000 | D2200*L6000 | D2600*L6600 |
3 | Daily Handling capacity | 5 tons | 8 tons | 10 tons |
4 | Structure Form | Horizontal type | Horizontal type | Horizontal type |
5 | Working pressure | Normal pressure | Normal pressure | Normal pressure |
The raw materials
waste tire,waste plastic,waste rubber
The out put product
the crude oil
the carbon black
the steel wire