Welcome to B2BAGE
full automatic roller Forming Line for refrigerator side panel
full automatic roller Forming Line for refrigerator side panel

Minimum Order: 0
Quality/Safety Certification: 0.00


Roller forming machine for refrigeration side panel.
1. full-automatic servo control,
2, lower manual operating,
non standard

  U-shape shell roller forming machine line

 

      This machine line is special for refrigerator side panel roller forming which can be suited for different products manufacturing in width and length, it has advantage for easy adjusting and operating; The machine is composed by following parts: auto loading metal sheet---punching machine→180°turn over---roller forming section---Z-L bending (Z for U bending and L for end 90°shape), and other parts like pneumatic system and electric control system etc.

     

       Main technical parameters

1. Outline dimension of forming line (reference): about 42000×3500×1500

2. Height for the workpiece:  900mm from ground: 

3. Stations:  6

4. Dimensions of the applied sheets: length: 1400~4200mm, width: 500~650mm,    thickness: 0.4~0.6mm
5. Machine cycle time: 35-40s/piece (U shape), 20-25s/piece (single) 
6.Applied raw material:  Pre-paint sheet (PCM), VCM sheet, cold-rolled plate
7.Dimensions of the U-shape shell:  height: 500~1800mm, width: 450~700mm, depth: 450~600mm
8. Power supply:  about 30KVA (380V 50HZ)
9. Air supply: 0.5-0.65Mpa
10. Water supply: industry tap water

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.