Refrigerating Equipment adopts the advanced technology and management theory from GERMANY. Schneider electronic components.
Refrigerating Equipment adopts the advanced technology and management theory from GERMANY.
Technical Parameter of Refrigerating Equipment
Model Item | AC-0.6 | AC-1 | AC-2 | |
nominal cooling capacity | kcal/h | 1290 | 2382 | 4541 |
kw | 1.5 | 2.77 | 5.28 | |
input power | kw | 1.01 | 1.34 | 2.27 |
power supply | 1PH~220V 50HZ | |||
refrigerant | type | R22 | ||
type of control | capillary | |||
compressor | type | hermetic rotary | ||
power (kw) | 0.59 | 0.89 | 1.77 | |
condenser | type | finned copper tube + low noise outer rotor fan | ||
cooling air flow (m3/h) | 750 | 1000 | 2000 | |
evaporator | type | tank with coil (shell and tube) | ||
chilled fluid flow (m3/h) | 0.258 | 0.476 | 0.908 | |
volume (L) | 16 | 20 | 40 | |
inlet and outlet pipe diameter (inch) | 1/2 | |||
pump | power (kw) | 0.37 | ||
lift(m) | 20 | |||
safety protection | compressor over temperature, over current, high pressure, over temperature,flow switch, phase sequence, phase-missing, exhaust overheating | |||
weight | kg | 50 | 73 | 100 |
dimension | mm | 500*500*725 | 500*500*725 | 580*550*925 |
Note: 1. The nominal cooling capacity is according to: Inlet chilled fluid temperature: 12 Outlet chilled fluid temperature: 7 Inlet cooling air temperature: 30 Outlet cooling air temperature: 38 2. Working range: The temperature range of chilled fluid is from 5 to 35; Temperature difference between inlet and outlet chilled fluid is from 3 to 8. It is better to use the chiller while the ambient temperature at or below 35. We reserve the right to modify the above dimensions or parameters without further notice. |