disconnection module
Subscriber Terminal Block
PCB Terminal Blocks
KRONE LSA-PLUS modules
Connection Strips Module ANSHI
1Environment condition: -5-40 degree Celsius Relative humidity <85% (+30 degree Celsius)Atmospheric pressure: 70-106KPa
2The modules are compatible with KRONE LSA-PLUS modules.The design ofcontacts basing on the principle of airtight contacting makes acompletely reliable connection between the contacts and wires
3Size (H x W x D): 75mm x 21.5mm x 40.5mm (5 Pairs)
4Pulling-out force: tin bronze and silver plating (20-40 uinch), pulling-out force not less than 25N
5Internal diameter of connection wire: 0.4-0.6 mm
6The performance of anti-burn: PBT UL94V-0or anti-burn ABS UL94V-0,Combustibility achieved GB/T 5169.7-1985 standard
7Insulated resistance: under standard atmospheric pressure ,Insulatedresistance no less than 1,000M ohm between the two disjunct connections
8Intermediate resistance between the reed terminators: no more than 7mohm between intermediate reed under the standard examination condition
9Intermediate resistance: no more than 3m ohm under standard examination condition
10Dielectric strength: according to industry standard
11Specification: 5 pairs
12Type: disconnection type
13Life: durability 200 cycles
10 pair disconnection module on cable side with an aditional screw terminal.For terminating wires with conductor cross section up to ( )mm
disconnection module
Subscriber Terminal Block
PCB Terminal Blocks
KRONE LSA-PLUS modules
Connection Strips ANSHI
disconnection module
Subscriber Terminal Block
PCB Terminal Blocks
KRONE LSA-PLUS modules
Connection Strips Module ANSHI