Welcome to B2BAGE
STM32W/Em351/Em357 Standard 2.4GHz ZigBee Module (1mW, DIP), IEEE 802.15.4 ZigBee 2007 PRO
STM32W/Em351/Em357 Standard 2.4GHz ZigBee Module (1mW, DIP), IEEE 802.15.4 ZigBee 2007 PRO

Minimum Order: 0
Quality/Safety Certification: 0.00


1. State-of-art ZigBee chip adopted
2. Industry-leading 32-bit ARM CortexTM-M3 processor
3. Stable ZigBee protocol

1. Introduction

Rexense DIP ZigBee Module is a type of surface mounted module that enables users to implement ZigBee/IEEE 802.15.4 compliant solution which satisfies the needs of low-cost, low-power wireless sensor networks. The module is easy-to-use, saves board space and offers reliable delivery of data between devices.

Rexense DIP ZigBee Module operates within the ISM 2.4GHz frequency band. The module’s default configuration supports a wide range of data system applications. The module is embedded with 32-bit wireless microcontroller to offer a wide variety of solutions.

 

 

2. Product Features

State-of-art ZigBee chip adopted

Industry-leading 32-bit ARM® CortexTM-M3 processor

Stable and reliable ZigBee protocol stack embedded

Easy to implement ZigBee technology integration for hardware equipment manufacturers

Wide communication range and high network reliability

 

3. Specifications

Table 3-01: Specifications of DIP ZigBee Module

Model Name

REX3D

Name

Standard DIP Module

Basic Specification

Operating Frequency Band

ISM 2.4GHz

Operating Temperature

-40 ~ 85°C

Antenna Interface

U.FL header;

Silvered antenna;

PCB antenna

Dimensions (L*W*H)

32.20*20.50*10.50mm

RF Features

Maximum Transmit Range

150m (PCB antenna)

200m (SMA antenna)

Maximum Transmit Power Output

7dBm

RF Data Rate

250kbps

Serial Data Rate (software selectable)

1200-230400 bps

RX Sensitivity (1% packet error rate)

-98~-99 dBm

Electrical Features

Supply Voltage

3.3±0.3V

Operating Current(Transmit)

40mA@7dBm

Operating Current(Receive)

27mA@7dBm

Power-down Current

0.4μA

Interface Features

24 GPIO ports;

4 interrupt ports;

1 serial ports UART supported; 1 SPI and I2C supported;

6x12 bits A/D ports.

Network Features

Supported Network Topologies

Point-to-point, Point-to-multipoint, Peer-to-peer Mesh

Number of Channels

(software selectable)

16 Direct Sequence Channels

 

 

4. Product Pictures

 

5. Pin Description

6. Outline Drawings

 

7. Ordering Information

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.