Welcome to B2BAGE
WS-G5483, Copper GBIC, 1.25G, Optic Module/Transceiver, Cisco compatible
WS-G5483, Copper GBIC, 1.25G, Optic Module/Transceiver, Cisco compatible

Model No: DW-T1000G

WS-G5483, Copper GBIC, 1.25G, Optic Module/Transceiver, Cisco compatible Features:  Hot-pluggable GBIC footprint  Extended case temperature range (0°C to +70°C )  Low power dissipation (1.05 W typical)  Compact RJ-45 connector assembly  Access to physical layer IC via 2-wire serial bus  1000 BASE-T operation in host systems with SERDES interface Applications:  1.25 Gigabit Ethernet over Cat 5 cable DW-T1000G 1000BASE-T Copper GBIC transceivers are based on the GBIC Multi Source Agreement(MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.32. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. The DW-T1000G uses the GBIC’s RX_LOS pin for link indication, and 1000BASE-X auto-negotiation should be disabled on the host system. The DW-T1000G is compatible with 1000BASE-X auto-negotiation, but does not have a link indication feature(RX_LOS is internally grounded). Ordering information Part number Operating Case temperature DW-T1000G GBIC, 1000Mbps only, SERDES interface, Copper GBIC with spring latch References 1. Gigabit Interface Converter (GBIC) Transceiver Multi-Source Agreement (MSA), 2. IEEE Std 802.3, 2002 Edition. IEEE Standards Department, 2002. 3. “AT24C01A/02/04/08/16 2-Wire Serial CMOS E2PROM”, Atmel Corporation. 4. “Alaska Ultra 88E1111 Integrated 10/100/1000 Gigabit Ethernet Transceiver”,Marvell Corporation. Contact Skype: dongwe055

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.